Future University In Egypt (FUE)
Future University is one of most promising private universities in Egypt. Through excellence in teaching, research and service, Future University strives to provide a comprehensive, high-quality education that prepares our graduates to be future leaders.
mainLogo
Altagamoa Al Khames, Main centre of town, end of 90th Street
New Cairo
Egypt
Faculty of Engineering & Technology
Apply Now

Hasan Eleashy

Basic information

Name : Hasan Eleashy
Title: Lecturer
Personal Info: Dr. Hasan El.Eashy works as a Lecturer in Mechanical Engineering Department, Faculty of Engineering, Future University In Egypt. Main research topics: synthesis of mechanisms, mechanical design. View More...

Education

Certificate Major University Year
PhD Department of Mechanical Engineering Elmansoura University - Faculty of Engineerin 2014
Masters Mechanical Design Mansoura - Egypt 2006
Bachelor Production Engineering Mansoura - Egypt 2000

Teaching Experience

Name of Organization Position From Date To Date
Organization Radio & T.V Union 01/07/2002 31/01/2007

Researches /Publications

A new atlas for 8-bar kinematic chains with up to 3 prismatic pairs using Joint Sorting - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

01/06/2018

It is important for designers of mechanical systems to visualize as many kinematic structures of mechanisms as possible. In this paper, a systematic methodology is proposed to generate all solutions of planar 8-bar kinematic chains (KCs) with up to 3 prismatic (P) pairs. First, a totally automated technique is developed to enumerate all available configurations of prismatic pairs for each KC. Second, Joint Sorting Code (JSC) is introduced for the first time to represent all KCs. Then a Kinematic Chain Structural Matrix (KCSM) is generated for all KCs to solve the problem of isomorphism. Finally, all results are evaluated by considering rules of P-joints assignment introduced by Ref. [1]. A vc++ code has been developed for enumeration, codes generation and isomorphism detection processes. The proposed methodology produces a new atlas for 8-bar chains that contains 16 groups and 48 subgroups. It contains 108, 426 and 816 KCs with 1P, 2P and 3P-joints respectively. The presented technique can be extended to single degree-of-freedom (DOF) planar n-bar chains with simple joints.

Download PDF
Complete Atlas For Mechanically Constrained Double 3R Chains - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

01/03/2013

In this paper, a new methodology is applied to a mechanically constrain planar parallel robot formed by double 3R chains. This will transform the considered system to 8-bar mechanism. Graphical technique is introduced to enumerate all possible graphs. Then a new structural code is used to detect isomorphism and locked chains. Finally, reverse transformation is applied to construct 8-bar linkages from their corresponding graphs. As a result, a new complete atlas for 8-bar linkages is introduced for the first time, which consists of 39 linkages for independent link connections and 30 linkages for dependent link connections. Two, three and four fixed pivots are included in the proposed atlas. All enumerated linkages are compared with their corresponding kinematic chains introduced by Tsai.

Download PDF
USING STRUCTURAL CODE TECHNIQUE FOR ENUMERATION OF 6-BAR LINKAGES FROM OPEN 4-BAR CHAIN - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

M.Samy Elgayyar, M.N. Shabara

01/04/2012

This paper presents a systematic methodology to convert planar 3 degree-of-freedom open 4-bar chain into planar 1 degree-of-freedom 6-bar linkages. This objective is achieved by adding 2RR chains to the original mechanism. Hence, these additional chains mechanically constrain the relative movement of the end-effector to reach a required set of task positions. Graphical enumeration technique is applied for structural synthesis of all possible 6-bar linkages. Structural code technique is introduced as a new method for structural isomorphism. The proposed methodology produces 7 different forms of 6-bar linkages.

Download PDF
Structural Synthesis of 6 Bar Mechanisms as Mechanically Constrained 3R Chains - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

M.S.Elgayyar

01/01/2012

- In this paper, we consider the planar robot formed by 3R chain. To mechanically constrain the relative movement of the joints so that the end-effector reaches a specified set of task positions, two additional links are added to the 3R chain. Graphical representation is presented for enumeration process. Reverse transformation technique is developed to reconstruct 6-bar mechanisms from their corresponding graphs. Structural synthesis process yields designs for seven different forms of a six-bar linkage the Watt I and Stephenson I, II, and III six-bar linkages.

Download PDF
STRUCTURAL SYNTHESIS OF MECHANICALLY CONSTRAINED SINGLE LOOP 6-BAR CHAIN FROM DOUBLE 3R CHAIN - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

M.Samy Elgayyar, M.N. Shabara

01/01/2012

In the present work, graphical enumeration technique is applied for structural synthesis of mechanically constrained planar parallel robot formed by single loop 6- bar chain or two 3R chains. Two RR chains are added to the considered system to mechanically constraint the movement of its end-effector. Structural code has been proposed as a new systematic methodology to detect isomorphic graphs. Therefore, 32 non-isomorphic graphs are obtained from this enumeration process. All these graphs represent one-degree-of freedom eight-bar mechanisms. Reverse transformation process is presented to obtain the corresponding linkage diagrams for all results.

Download PDF
Synthesis of One Degree-Of-Freedom 6-Bar Linkages from Three Degree-Of-Freedom Open 4-Bar Chain Using Structural Code Technique - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

Mohammed ElGayyar, M. A. N. Shabara

01/01/2012

This paper presents a systematic methodology to convert planar 3 degree-of-freedom open 4-bar chain into planar 1 degree-of-freedom 6-bar linkages. This objective is achieved by adding 2RR chains to the original mechanism. Hence, these additional chains mechanically constrain the relative movement of the end-effector to reach a required set of task positions. Graphical enumeration technique is applied for structural synthesis of all possible 6-bar linkages. Structural code technique is introduced as a new method for structural isomorphism. The proposed methodology produces 7 different forms of 6-bar linkages.

Download PDF
Structural Synthesis of Mechanically Constrained Single Loop 6-Bar Chain - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

Mohammed ElGayyar, M. A. N. Shabara

01/01/2012

In the present work, graphical enumeration technique is applied for structural synthesis of mechanically constrained planar parallel robot formed by single loop 6bar chain or two 3R chains. Two RR chains are added to the considered system to mechanically constraint the movement of its end-effector. Structural code has been proposed as a new systematic methodology to detect isomorphic graphs. Therefore, 32 non-isomorphic graphs are obtained from this enumeration process. All these graphs represent one-degree-of freedom eight-bar mechanisms. Reverse transformation process is presented to obtain the corresponding linkage diagrams for all results.

Download PDF
Structural Synthesis And Enumeration of Epicyclic Gear Mechanisms - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

El-Gayyar, M. S.; M. Zaki

01/01/2008

In this paper, a new approach for graphical enumeration of epicyclic gear mechanisms is presented using the concept of acyclic graph. A new graphical code has been introduced to specify the priorities of all vertices of associated displacement graph. This graphical code is used to identify open graph, redundant links and isomorphic graphs. A computer program has been developed for automatic enumeration of displacement graphs as well as automatic detection of isomorphic graphs and open graphs and graphs with a redundant link without using adjacency matrices. This simplified methodology has been applied for the enumeration of epicyclic gear mechanisms with up to 12-links having up to 9 coaxial links. An atlas for 11 and 12-link mechanisms has been constructed using the proposed methodology.

Download PDF
Using Acyclic graph Method and elementary Gear Units for Sketching Epicyclic Gear Mechanisms - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

01/01/2006

December 2006

Download PDF
New Approach for Enumeration and Evaluation of n-Links Epicyclic Gear Mechanisms - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

01/01/2006

march 2006

Download PDF
Graphical Code Method as New Technique for Topological Synthesis of Epicyclic Gear Mechanisms - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

01/01/2006

February 2006

Download PDF
Structural Synthesis and Enumeration of Epicyclic Gear Mechanisms Up To 12-Links Using Acyclic Graph Method - 01/0

Hassan Mohamed Shams Eldin Elsayed Eleashy

M. S. El-Gayyar;Muhammad Zaki

01/01/2006

In this paper, a new approach for graphical enumeration of epicyclic gear mechanisms is presented using the concept of acyclic graph. A new graphical code has been introduced to specify the priorities of all vertices of associated displacement graph. This graphical code is used to identify open graph, redundant links and isomorphic graphs. A computer program has been developed for automatic enumeration of displacement graphs as well as automatic detection of isomorphic graphs and open graphs and graphs with a redundant link without using adjacency matrices. This simplified methodology has been applied for the enumeration of epicyclic gear mechanisms with up to 12-links having up to 9 coaxial links. An atlas for 11 and 12-link mechanisms has been constructed using the proposed methodology.

Download PDF

Awards

Award Donor Date
NA NA 2014

Follow us on

Visit the Faculty

ADS